HPE Compute XD690 vs Inventec P5800G7
Both are built on the NVIDIA HGX B300 8-GPU baseboard, so their accelerator performance is identical rather than merely similar. The choice between them is chassis, cooling, expansion and supplier, not FLOPS.
What actually differs
| Specification | HPE Compute XD690 | Inventec P5800G7 |
|---|---|---|
| Vendor | HPE | Inventec |
| Part number | S6G97A | P5800G7 |
| Form factor | rack | rack |
| Released | 2025 | — |
| Accelerator | 8x B300 | 8x B300 |
| Aggregate memory | 2.1 TB | — |
| Aggregate bandwidth | 64.0 TB/s | — |
| System power | 14.3 kW | — |
| Interconnect | NVLink 5.0 / NVSwitch 4.0 across the HGX B300 baseboard; 8x NVIDIA ConnectX-8 for InfiniBand XDR or Spectrum-X Ethernet scale-out | One NVIDIA HGX B300 NVL8 liquid-cooled baseboard, with eight 800Gb OSFP connectors driven by NVIDIA ConnectX-8 SuperNICs for east-west traffic |
Rows shown in grey are identical between the two.
HPE Compute XD690
A 10U air-cooled single-node chassis carrying eight NVIDIA Blackwell Ultra SXM6 GPUs on the HGX B300 baseboard, which HPE names directly in the orderable part S6A37A. Two Intel Xeon 6 processors with P-cores drive it, either the 6776P or the 6767P, both 64-core at 350 W, with up to 32 DDR5 DIMMs and a minimum system memory of 2,048 GB running at 5,200 MT/s in the two-DIMM-per-channel configuration HPE recommends for performance. Scale-out is eight ConnectX-8 adapters supporting InfiniBand XDR or Spectrum-X Ethernet, with storage of eight E1.S drives and two M.2. Power comes from twelve fixed 3,200 W Titanium supplies in an N+N redundant arrangement, and HPE rates the machine at 14.3 kW continuous and 16.4 kW peak. Air cooling a Blackwell Ultra system of this density is unusual and it shows in the mechanicals: the chassis weighs 226 kg, ships pre-racked by default, and HPE requires a server lift on site before its engineers will service it. HPE describes it as delivering 50 percent higher FP4 performance than the prior Blackwell generation but publishes no FLOPS figure of its own, so the compute shown is NVIDIA's specification for the HGX B300 board rather than an HPE claim.
Vendor product pageInventec P5800G7
Inventec's densest Blackwell Ultra node: the same eight-accelerator HGX B300 NVL8 baseboard as its 10U air-cooled sibling, folded into 5U at 448 by 219.5 by 875 mm by moving to liquid cooling. The fan count tells the story, four 80 mm GPU fans against fifteen in the air-cooled machine. East-west networking is eight 800Gb OSFP connectors driven by NVIDIA ConnectX-8 SuperNICs, one per accelerator, and hosts are Intel Xeon 6700 series with E-cores or 6700 and 6500 series with P-cores. Power is 3,300 W 54 V supplies in 4+1 or 4+2 redundancy with a 2,000 W 12 V host plane. This is the only Inventec node whose GPU count is stated on the page, in the NVL8 designation itself. No throughput, memory or system power figure is published.
Vendor product page