HPE ProLiant Compute XD685 (HGX H200) vs QCT QuantaGrid D74F-7U
Both are built on the NVIDIA HGX H200 baseboard, so their accelerator performance is identical rather than merely similar. The choice between them is chassis, cooling, expansion and supplier, not FLOPS.
What actually differs
| Specification | HPE ProLiant Compute XD685 (HGX H200) | QCT QuantaGrid D74F-7U |
|---|---|---|
| Vendor | HPE | QCT |
| Part number | — | D74F-7U |
| Form factor | rack | rack |
| Released | 2025 | — |
| Accelerator | 8x H200 | 8x H200 |
| Aggregate memory | 1.1 TB | 1.1 TB |
| Aggregate bandwidth | 38.4 TB/s | — |
| System power | — | — |
| Interconnect | NVLink 4.0 / NVSwitch 3.0 across the HGX H200 baseboard; 4x FHHL PCIe Gen5 x16 slots for fabric, NIC or DPU | One NVIDIA HGX H200 baseboard connecting the eight GPUs at 900 GB/s over NVLink; one BlueField-3 DPU, with ten OCP 3.0 TSFF PCIe Gen5 x16 slots in place of the D75F's internal slots |
Rows shown in grey are identical between the two.
HPE ProLiant Compute XD685 (HGX H200)
The eight-way XD685 in its NVIDIA HGX H200 configuration, the only one of the four HPE offers in both air-cooled and liquid-cooled form: 6U for air with accelerator kit S3P89A, 5U for direct liquid cooling with S4X53A. Two fifth-generation AMD EPYC processors drive it, from 32 to 96 cores and 280 to 400 W, across 24 DIMM slots with twelve channels per socket and up to 6 TB of DDR5-6400. Storage is eight EDSFF NVMe E3.S drives, or twelve with a storage controller, plus RAID-1 M.2 boot. No chassis part number is recorded because two apply depending on cooling, S4Q28A for air and S4R96A for liquid. HPE publishes no system power draw for the XD685, only twelve 3,000 W Titanium supplies with ten deployable, so nothing is summed here; the compute figures are NVIDIA's for the HGX H200 baseboard rather than an HPE claim.
Vendor product pageQCT QuantaGrid D74F-7U
The OCP-slot variant of QCT's 7U Hopper machine, carrying the same eight NVIDIA HGX H200 GPUs at 900 GB/s over NVLink and the same 1.1 TB of aggregate high-bandwidth memory as the D75F-7U. The differences are in I/O and packaging: one BlueField-3 DPU rather than two, ten OCP 3.0 TSFF PCIe Gen 5 slots, a shorter 886 mm chassis, and three-plus-three 4,000 W Titanium supplies. QCT quotes the same over 32 petaflops of FP8 figure, which is not shown here for the same reason as on the D75F: the basis is unstated and cannot be settled. Power figures are supply capacity, not draw.
Vendor product page