QCT QuantaGrid D75H-10U vs QCT QuantaGrid D75L-3U
Both are built on the NVIDIA HGX B300 8-GPU baseboard, so their accelerator performance is identical rather than merely similar. The choice between them is chassis, cooling, expansion and supplier, not FLOPS.
What actually differs
| Specification | QCT QuantaGrid D75H-10U | QCT QuantaGrid D75L-3U |
|---|---|---|
| Vendor | QCT | QCT |
| Part number | D75H-10U | D75L-3U |
| Form factor | rack | rack |
| Released | — | — |
| Accelerator | 8x B300 | 8x B300 |
| Aggregate memory | — | 2.3 TB |
| Aggregate bandwidth | — | — |
| System power | — | — |
| Interconnect | One NVIDIA HGX B300 8-GPU baseboard; scale-out is eight ConnectX-8 OSFP ports carrying 800G Ethernet or InfiniBand at one port per GPU for GPU-Direct RDMA | One NVIDIA HGX B300 8-GPU baseboard with fifth-generation NVLink at 1.8 TB/s; eight onboard ConnectX-8 SuperNICs at up to 800Gb/s for east-west traffic, with up to three further NICs for north-south |
Rows shown in grey are identical between the two.
QCT QuantaGrid D75H-10U
QCT's 10U Blackwell Ultra server, built on the NVIDIA HGX B300 platform with two Intel Xeon 6 processors. Networking is eight ConnectX-8 OSFP ports at 800G, one per accelerator, for one-to-one GPU-Direct RDMA, and there is room for four full-height full-length PCIe Gen 5 slots. QCT quotes 72 PFLOPS of FP8 and 144 PFLOPS of FP4 without saying whether either is dense or sparse. Both match NVIDIA's sparse figures for this baseboard exactly, and neither matches the dense figures of 36 and 108, so they are recorded as sparse. Worth noting QCT calls the FP8 number a training figure, which would normally imply dense; the number itself settles the basis, not the label. Power is twelve 3,200 W supplies in N+N redundancy, which is capacity rather than draw, so no system power is shown.
Vendor product pageQCT QuantaGrid D75L-3U
QCT's density play: the same NVIDIA HGX B300 8-GPU baseboard as its 10U sibling, compressed into 3U by liquid cooling and designed for the NVIDIA MGX rack rather than a standalone chassis. It takes power from a 1400A busbar and rack power shelves instead of its own supplies, which is why no power figure appears here at all, and supports DC-SCM. Fifth-generation NVLink runs at 1.8 TB/s, and eight onboard ConnectX-8 SuperNICs handle east-west traffic at up to 800Gb/s. Hosting is two Intel Xeon 6700 P-core processors at up to 350 W. QCT states 2.3 TB of HBM3e per system, which is eight B300 modules at 288 GB apiece; note NVIDIA quotes 2.1 TB for the same baseboard, and this entry keeps QCT's figure since QCT is the one publishing it. No throughput figure is given for this model.
Vendor product page