Fujitsu PRIMERGY GX2580 M8s vs Inventec P9000G7 (AC)

Both are built on the NVIDIA HGX B300 8-GPU baseboard, so their accelerator performance is identical rather than merely similar. The choice between them is chassis, cooling, expansion and supplier, not FLOPS.

What actually differs

Specification	Fujitsu PRIMERGY GX2580 M8s	Inventec P9000G7 (AC)
Vendor	Fujitsu	Inventec
Part number	GX2580 M8s	P9000G7 (AC)
Form factor	rack	rack
Released	—	—
Accelerator	8x B300	8x B300
Aggregate memory	—	—
Aggregate bandwidth	—	—
System power	—	—
Interconnect	One NVIDIA SXM HGX B300 8-GPU baseboard integrating eight Blackwell Ultra SXM modules with high-speed interconnect; scale-out is eight NVIDIA ConnectX-8 OSFP 800GbE ports, alongside two 10GbE RJ45 on an Intel X710	One NVIDIA HGX B300 air-cooled baseboard, with eight 800Gb OSFP connectors for east-west traffic

Rows shown in grey are identical between the two.

Fujitsu PRIMERGY GX2580 M8s

Fujitsu's Blackwell Ultra machine, built on one NVIDIA SXM HGX B300 8-GPU baseboard integrating eight Blackwell Ultra SXM modules. Networking is the notable part: eight NVIDIA ConnectX-8 OSFP ports at 800GbE apiece, one per accelerator, so scale-out matches the baseboard rather than bottlenecking it. Hosting is two Intel Xeon 6700 or 6500P processors reaching 86 cores and 172 threads, with 32 DIMM slots taking up to 8 TB of DDR5-6400. Storage is eight hot-plug E1.S NVMe bays holding up to 123 TB plus two M.2 devices, and there are two front full-height half-length PCIe 5.0 x16 slots. The 8U chassis measures 483 by 980 by 356 mm and weighs up to 137 kg with rails, drawing from six 6,600 W Titanium supplies in 3+3 redundancy. Fujitsu states no total GPU memory, no throughput figure and no system power draw; baseboard performance is on the linked HGX B300 entry.

Vendor product page

Inventec P9000G7 (AC)

The Blackwell Ultra generation of Inventec's 10U air-cooled node, in the same 448 by 441 by 850 mm chassis as its B200 sibling but hosted by Intel Xeon 6700 series with E-cores or 6700 and 6500 series with P-cores. It carries one NVIDIA HGX B300 baseboard and eight 800Gb OSFP connectors for east-west networking, one per accelerator. Storage is eight U.2 NVMe bays with four optional more and two M.2. The accelerator power plane moves to 3,300 W supplies in 5+1 redundancy, tighter than the B200 node's 4+2, with a 2,000 W 12 V host plane. Inventec publishes no throughput, memory or system power figure; the linked HGX B300 entry carries NVIDIA's. The GPU count is not stated and is taken from NVIDIA's designation of HGX B300 as an eight-GPU baseboard.