QCT QuantaGrid D75F-7U
QCT's 7U Hopper machine, with two fifth or fourth generation Intel Xeon Scalable processors and eight NVIDIA HGX H200 GPUs linked at 900 GB/s over NVLink. Storage is eighteen small-form-factor all-NVMe bays for GPU-Direct Storage plus a boot drive, and two NVIDIA BlueField-3 DPUs offload networking. QCT gives 1.1 TB of aggregate high-bandwidth memory. It also quotes over 32 petaflops of FP8, which is not shown here: QCT does not say whether that is dense or sparse, it is close to double the dense figure NVIDIA published for this baseboard, and NVIDIA no longer lists the H200 on its HGX page, so there is no way to settle which column it belongs in without guessing. Power is four-plus-two 4,000 W Titanium supplies, which is capacity rather than draw.
We will point you at suppliers who have it. Free, and no signup.
Systems built on this design
11 configurationsBuilt on the NVIDIA HGX H200 baseboard, so accelerator performance matches the reference. Chassis, CPU, memory and cooling are this vendor's own.
System Details
GPU Configuration
System Specifications
Powered by NVIDIA H200
This system utilizes 8 × NVIDIA H200 SXM 141GB GPUs, each delivering exceptional performance for AI and HPC workloads.
Per GPU TDP
700W
Per GPU Memory
141 GB
Process Node
4nm
Architecture
Hopper
Documentation & Resources
Official Datasheet
QCT QuantaGrid D75F-7U technical specifications
QCT QuantaGrid D75H-10U
QCT • Latest version
Typical Use Cases
The QCT QuantaGrid D75F-7U runs 8× H200 GPUs over One NVIDIA HGX H200 baseboard connecting the eight GPUs at 900 GB/s over NVLink, which QCT notes is seven times the bandwidth of PCIe Gen 5; two BlueField-3 DPUs handle networking.