Inventec P9000AG7 (AC)
Inventec's air-cooled Blackwell node on AMD hosts, a 10U chassis 448 by 441 by 850 mm carrying one NVIDIA HGX B200 baseboard alongside fifth-generation AMD EPYC processors of up to 400 W. Storage is eight U.2 NVMe bays from the PCIe switch plus four more from the CPU and two M.2, and the switch also provides eight low-profile PCIe Gen5 x16 slots. Cooling is air, with fifteen 80 mm fans on the GPU side and five on the CPU side, and power comes from 3,300 W 54 V supplies in 4+2 redundancy for the accelerators with a separate 2,400 W 12 V plane in 1+1 for the host. Inventec publishes no throughput, memory or system power figure for the node; the baseboard's figures are on the linked HGX B200 entry. The GPU count is not stated on the page either, and is taken from NVIDIA's designation of HGX B200 as an eight-GPU baseboard.
We will point you at suppliers who have it. Free, and no signup.
Systems built on this design
9 configurationsBuilt on the NVIDIA HGX B200 8-GPU baseboard, so accelerator performance matches the reference. Chassis, CPU, memory and cooling are this vendor's own.
System Details
GPU Configuration
System Specifications
Powered by NVIDIA B200
This system utilizes 8 × NVIDIA B200 SXM 180GB GPUs, each delivering exceptional performance for AI and HPC workloads.
Per GPU TDP
1000W
Per GPU Memory
180 GB
Process Node
4nm
Architecture
Blackwell
Documentation & Resources
Official Datasheet
Inventec P9000AG7 (AC) technical specifications
Inventec Artemis Rack
Inventec • Latest version
Typical Use Cases
The Inventec P9000AG7 (AC) runs 8× B200 GPUs over One NVIDIA HGX B200 air-cooled baseboard; eight low-profile PCIe Gen5 x16 slots hang off the switch, with one further full-height slot or an OCP 3.0 SFF from the mainboard.